NEW GSM SOLUTIONS: 2011

These are instructions on how to jailbreak your iPhone 3GS or iPhone 4 on iOS 5.0.1 without updating the baseband using RedSn0w for Windows. You may want to do this to preserve an unlock from a lower baseband version.

Please note this jailbreak is tethered for every device but the old bootrom iPhone 3GS which means you will need to connect your device to the computer each time you reboot. Also, it may be prudent to save your SHSH Blobs before continuing if you haven't already.

Step One
Create a folder on your desktop called Pwnage

The iPhone Dev-Team has released UltraSn0w 1.25 which brings iOS 5.0.1 support to the unlock for older basebands.

try this solution one by one.
Step1:check bsi line.bsi line cut. apply this jumper.

Step2.try flash same product code.

step3.remove this N2121.

Nokia C3-00

Aircel has announced that it will be launching the iPhone 4S in India on November 25th.

Aircel brings you iPhone 4S, the most amazing iPhone yet.
Coming on Nov. 25th, 2011 to an Aircel store near you. Look out for our attractive plans!

Secure your iPhone 4S in advance. Pre-ordering starts on Nov. 18th, 2011.
Hit the link below for more information...
Read More

Semaphore has updated TinyUmbrella, an app that saves your SHSH blobs, with support for iOS 5.0.1 and tentative support for the iPhone 4S.

Even though there is still no working solution for restoring 5.x on iPhone 4S I have released a 5.01.00 so you can at least save 5.0.1 SHSH. I have added tentative support for at least saving 5.0.1 SHSHs for iPhone 4S but as of now we are unable to use them fully. As soon as more information is available I will update.
~Download here~
Read More

TinyUmbrella [OSX]

TinyUmbrella [WIN]

iH8Sn0w has updated Sn0wBreeze to jailbreak iOS 5.0.1 which was released today.

sn0wbreeze v2.8 [BETA 11]:
● Supports iOS 5.0 (9A334)/5.0.1 (9A405)
● Fixed iBooks sandbox crashing issues (as of 2.8b9).
● Fixed location services issues with iPhone 3GS users running the iPad baseband (as of 2.8b9).
● Re-added iPad baseband install option to iPhone 3GS.
● Tethered devices are booted via iBooty which is extracted to the Desktop after running sn0wbreeze.

Tethered?
● iPhone 3GS (old bootrom)...NO
● iPhone 3GS (new bootrom)..YES
● iPhone 4 (GSM)............YES
● iPhone 4 (CDMA)...........YES
● iPod Touch 3G.............YES
● iPod Touch 4..............YES
● iPad 1G...................YES

iPhone 3GS iPad baseband (06.15.00) users:
- Re-flash the iPad baseband via sn0wbreeze if you restore(d) to a stock 5.0 firmware.

You can download the new version of Sn0wBreeze from the link below...

sn0wbreeze v2.8b11 (For iOS 5.0/5.0.1)

Apple has released iOS 5.0.1 for the iPhone, iPad, and iPod touch.

This update contains improvements and other bug fixes including:
• Fixes bugs affecting battery life
• Adds Multitasking Gestures for original iPad
• Resolves bugs with Documents in the Cloud
• Improves voice recognition for Australian users using dictation

Products compatible with this software update:
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPad 2
• iPad
• iPod touch (4th generation)
• iPod touch (3rd generation)

For information on the security content of this update, please visit this website: http://support.apple.com/kb/HT1222.

iOS 5.0.1 Firmware Download Links build number 9A405

iPhone 3GS
iPhone 4 GSM
iPhone 4 CDMA
iPhone 4S
iPad
iPad 2 (also iPad 2 AT&T and iPad 2 Verizon)
iPod touch 3G
iPod touch 4G

DOWNLOAD
Publish Post

pass
www.jamgsm.com

===============================
sn0wbreeze v2.8 [BETA 11]:
===============================
* Supports iOS 5.0 (9A334)/5.0.1 (9A405)
* Fixed iBooks sandbox crashing issues (as of 2.8b9).
* Fixed location services issues with iPhone 3GS
users running the iPad baseband (as of 2.8b9).
* Re-added iPad baseband install option to iPhone 3GS.
* Tethered devices are booted via iBooty which is
extracted to the Desktop after running sn0wbreeze.
===============================
Tethered?
===============================
- iPhone 3GS (old bootrom)...NO
- iPhone 3GS (new bootrom)..YES
- iPhone 4 (GSM)............YES
- iPhone 4 (CDMA)...........YES
- iPod Touch 3G.............YES
- iPod Touch 4..............YES
- iPad 1G...................YES
===============================

************************************************
** iPhone 3GS iPad baseband (06.15.00) users: **
************************************************
- Re-flash the iPad baseband via sn0wbreeze
if you restore(d) to a stock 5.0 firmware.
************************************************

Now available at: http://iH8sn0w.com

// iH8sn0w
Dowload

How TO Jailbreak iOS 5.0.1 Using Redsn0w

Well well well, after the release of iOS 5.0.1 by Apple, earlier today, folks over RedmondPie tested the last version of Redsn0w on iOS 5.0.1 and confirmed that Redsn0w can tethered-jailbreak the final iOS 5.0.1 on iPhone, iPod touch and iPad.

Click here to enlarge

Actually it's an old tool so you will jailbreak your iDevice and will connect it to your computer to boot using Redsn0w whenever your iDevice is switched off or rebooted, yes you can use SemiTether to jailbreak your iDevice with this iOS 5.0.1, your iDevice will boot but will not function to a satisfactory degree until connecting your device to Redsn0w.

Important Notes:

iPhone 4S and iPad 2 not supported

If you want Untethered jailbreak please stay away!

For Unlockers Only:

For those of you who unlocked iPhone 4 using GEVEY SIM interposer, you should create a custom, IPSW which will preserve your baseband.

To active this, you should open Redsn0w, hit “Extras”, then “Custom IPSW” then point REdsnow to your iOS 5.0.1.

Finally, open pwned DFU mode and select:

Quote:

(Extras > Pwned DFU) and restore to your custom firmware via iTunes. Once complete, you’ll be able to unlock your device with GEVEY once more.

Getting Started

1- Download iTunes for Mac or Windows .
2- Back your device up through iTunes.

3- Update your iDevice to iOS 5.0.1

4- Download Redsn0w for Mac or Windows.

5- Run Redsn0w, hit “Extras” => “Select IPSW”, point it to iOS 5.0 firmware which you can download from here. Select the appropriate firmware file tailored for your device.
iOS 5 For iPhone, iPad And iPod Touch Download Links:

Download iOS 5 iPhone 4 (GSM)

Download iOS 5 iPhone 4 (Verizon)

Download iOS 5 iPhone 3GS

Download iOS 5 iPad 2 WiFi

Download iOS 5 iPad 2 GSM

Download iOS 5 iPad 2 CDMA

Download iOS 5 iPad

Download iOS 5 iPod touch 3G

Download iOS 5 iPod touch 4G

Download iTunes 10.5 for Windows and Mac

6- Select “Jailbreak” and Select “Install Cydia”, followed by DFU mode and then Redsn0w will do the rest.

7- Now you will need to launch Redsn0w to boot tethered, select “Extras”, follow this step by “Just Boot”. Once everything is complete you will need to follow this simple tutorial again whenever your iDevice is switched off or rebooted.

“Semi-Tethered”

You can follow our simple tutorial posted here to download and install Semi-Tethered on your iPhone, iPad and iPod touch, yes it will allow you to boot your iDevice, but of course not as like Redsn0w, boot with limited use of features.

1- clean i/o connector flex and pcb connector

2- replace i/o connector flex and pcb connector
3- replace 1 or 2 transistor under shield (check oxy), if no transistor available make jumper.
phone charge @ 290mA , stop charge after 5h, dont get hot and stby time is right.
probably transistor cut power when too hot or someting like.
if solved press thank!!

Find under the shield but at the back of main board right side at the bottom

Download Link

After some feedback on reddit, we’ve decided to make the initial jailbreak as quick as possible by no longer “stashing” the applications by default during the redsn0w run. This reduces the time to actually perform the jailbreak from 210 seconds to 80 seconds (60 percent!). However, you make up for much of that the first time you launch Cydia, which will then want to stash the applications. You can choose whether you want redsn0w or Cydia to stash in the Preferences pane.

Here are the download links:

redsn0w 0.9.9b7 for Mac

redsn0w 0.9.9b7 for Windows

Developer Steven Troughton-Smith has made some progress on porting Siri voice assistant to the iPhone 4, reports 9to5Mac.

Siri on the iPhone 4 can recognize spoken commands in both the standard Siri view and the keyboard Dictation view. The only issue at this point is that Apple is not authenticating (obviously) commands to its servers from iPhone 4 hardware. The Siri port to the iPhone 4, at this point, also has the ability to speak back to the user. You may notice Siri and the iPhone 4 acting very sluggish in the above video. The issue here is not Siri, but is that a special GPU driver for iPhone 4 is needed; and it is obviously not included in the iPhone 4S binary cache – where the Siri files are located.

Click here to enlarge

Here’s a video of Siri running on iPhone 4:

iFixYouri has posted a video showing you the steps to disassemble the iPhone 4S.

A lot of the features are very similar, but not the same to the CDMA and GSM, including the screen, dock connector, back glass, and the vibrator(same as the CDMA), making replacement and repair services readily available.

Take a look below...

ultrasn0w 1.2.4 released for iOS5

pre-QUALifier

We’ve updated ultrasn0w to be compatible with iOS5, which came out a few days ago. While ultrasn0w 1.2.4 doesn’t add support for any new basebands, the update is required for any ultrasn0w unlockers trying out iOS5 (it remains backwards compatible though, so you should be able to use it no matter what firmware you have).

The supported basebands for the iPhone 3G and 3GS are 04.26.08, 05.11.07, 05.12.01, 05.13.04, and 06.15.00. The baseband supported for the iPhone4 is 01.59.00.

MuscleNerd of iPhone Dev-team has just announced some important news on his Twitter account. MuscleNerd has post a screen-shot of the upcoming version of Redns0w 0.9.9 b5 which will have major update, the Dev-team will merge PwnageTool into Redsn0w.

What that means, you will be able to cook your custom firmware from Redsn0w directly which was the major advantage of PwnageTool and Sn0wbreeze. Both PwnageTool (for Mac) and Sn0wbreeze (for Windows) are being used mainly by who rely on unlock for their iPhones as they can preserve the unlockable baseband so they can unlock their iPhones with ultrasn0w. Now Redsn0w new feature will kill the both PwnageTool and Sn0wbreeze for ever, as Redsn0w is always available for both Mac and Windows. The only case that the Dev-team will upgrade PwnageTool is only in case of untethered jailbreaks.

Thanks Dev-team about your continuous hard work and improvements. This is really awesome.

Unlock iPhone 4, 3GS on iOS 4 with ultrasn0w is coming soon. MuscleNerd of iPhone Dev-team has announced on his Twitter account that any user who is running iOS 4.x.x or lower where ultrasn0w is work will be able to unlock his iPhone 4 or iPhone 3GS on iOS 5 after the Dev-team makes some updates on ultrasn0w.

This is not a new unlock for higher basbands. Ultrasn0w will be updated to work with iOS 5 to unlock the already unlockable basebands.

Supported basebands:
01.59.00 / 04.26.08 / 05.11.07 / 05.12.01 / 05.13.04 / 06.15.00

Unsupported basebands :
02.10.04 / 03.10.01 / 04.10.01 / 05.14.02 / 05.15.04 / 05.16.02

So the dev-team will release iOS 5 unlock with ultrasn0w soon according to MuscleNerd,

Apple today released iTunes 10.5, a new version of its media manager that adds a number of improvements and official support for devices running iOS 5. The next major version of Apple’s iOS is coming out this week on Wednesday, October 12th, and iTunes 10.5 will be required to sync devices that will be upgraded to the new software. iTunes 10.5 also enables iTunes Match, a new music service by Apple based on iCloud; iTunes Match, however, will publicly launch in the United States only at the end of OctoberiTunes 10.5 was originally seeded to developers in June, when Apple also released the first beta version of iOS 5. Since then, we noted iTunes 10.5 included some minor graphical updates to the interface; this summer Apple also rewrote iTunes’ codebase to take advantage of Lion with full 64-bit support, and this new version of the app includes the changes we originally reported here. iTunes 10.5 also adds support for iCloud, Apple’s new cloud service that allows users to store digital purchases in the cloud, and re-download them at any time on any device. This functionality was previously activated as “beta” and called iTunes in the Cloud; as Apple notes, “iTunes in the Cloud is now part of iCloud”, but that doesn’t change the way songs have been able to be pushed across devices since last June. iCloud will also be officially launched on October 12th alongside iOS 5.

Update #12: For those of you who experiment with your own custom ramdisks using the -r command-line option, version 0.9.9b4 adds auto-detection support for iOS5. This is needed because iOS4 and iOS5 treat the root partition differently (it’s encrypted in iOS5). redsn0w will now upload the correct iOS5 kernel by itself, but it’s up to your own launchd to determine if it needs to mount using the old or new partition scheme.
redsn0w now also accepts both native and img3-encapsulated versions of files you provide via the -r, -k, and -d command-line options (do redsn0w -h to show all the available options).

Rest in Peace Steve Jobs

iH8Sn0w recently tweeted that he has updated Sn0wBreeze to version 2.8 beta 8 to Jailbreak the iOS 5 beta GM firmware.

Like most versions of Sn0wBreeeze, Sn0wBreeze v2.8 beta 8 supports standalone baseband preservation to allow unlockers to update to the iOS 5 GM firmware. One new feature that iH8Sn0w has introduced in this beta version of Sn0wBreeze is instant IPSW detection. Additionally iH8Sn0w has mentioned UDID Developer Check Removal is no longer needed.

The Verge has published a nice chart comparing the iPhone 4S vs. iPhone 4 vs. Samsung Galaxy S II.

Apple today held their special fall event at their Town Hall Auditorium, Cupertino, California to launch their next iteration of iPhone, the iPhone 4S. All the rumors about hardware bump were true there’s no change in over all design of iPhone 4S it’s exactly same as it was for iPhone 4.

Redsn0w 0.9.9b3a

Click here to enlarge

Redsn0w 0.9.9b2

Update #10: Version 0.9.9b2 has been released with fixes and enhancements related to: Verizon iPhone4 firmware detection, Fix Recovery, Stitching, and blob processing. If you encountered a problem with any of these in the b1 version, please try b2 and leave any feedback below!

Here are the download links:
redsn0w 0.9.9b2 for Mac

redsn0w 0.9.9b2 for Windows

As promised MuscleNerd of iPhone-Dev has just released redsn0w 0.9.9b1 with some major improvements. New version of redsn0w, redsn0w 0.9.9 b1 comes with tons of new feature including automatic device detection in DFU mode and now you don’t need to select IPSW manually, it will detect and download required files from Apple servers for you.

Did you experience iTunes error -9812 when accessing iTunes Store ? The message appear is "iTunes could not connect to the iTunes Store. An unknown error occurred (-9812). Make sure your network connection is active and try again." Let's check out the how to fix error 9812 after the jump.

Some of our readers getting Error 0xE8000065 when connecting iPhone, iPod touch, iPad with iTunes on their Windows PC. Here's the error message "iTunes could not connect to this iPhone because an unknown error occurred (0xE8000065)" Let's check out how to fix itunes error 0xE8000065 after the jump.

What iTunes Error 3194 Mean

Whenever you restore a stock or custom IPSW of any firmware on your iDevice, iTunes request Apple servers to sign the IPSW with the ECID (Exclusive Chip ID) of your iDevice which is called SHSH Blob. As soon as new firmware gets released, Apple stops signing your ECID for old firmwares which result in iTunes 3194 error.

Today's iOS5b7 can be JB with last night's redsn0w b7 Dev-Team Blog - redsn0w iOS5beta but point it at b6 IPSW...annoying off-by-1 now

Update #7: Apple updated the iPad1 iOS5b6 IPSW without changing its version number or filename, so we’re releasing redsn0w 0.9.8b7 to handle both the original and changed IPSW. We’ve also added explicit support for a tethered 4.3.5/4.2.10 jailbreak (instead of pointing at the 4.3.4/4.2.9 IPSWs) and fixed a 4.2.10 problem.

All jailbreaks are Tethered jailbreak's

Download Redsn0w 0.9.8b7:

Redsn0w 0.9.8b7 for Mac

Redsn0w 0.9.8b7 for Windows

Apple seeded iOS 5 Beta 7 earlier today and with the release of iOS 5 Beta 7 Apple also seeded iTunes 10.5 Beta 7, XCode 4.2 Developers preview 7 and Apple TV Software Beta 6. Apple also released an iTunes update (iTunes 10.5 Beta 6.1) couple of days ago which added the support of iTunes Match. iTunes Match allows you to upload your music library to cloud.

Apple officially announced that iTunes Match won’t allow you to stream music from iCloud Servers.
iTunes 10.5 Beta 7 will be required by people who will manually restore their iOS device to iOS 5 Beta 7.
Remember: iTunes 10.5 Beta 7 won’t allow you to Sync previous versions of iOS 5 Betas.
Also release tonight were updates to XCode 4.2 and Apple TV. XCode 4.2 (Developers Preview 7) carries a build number of 4D177b and is available for both Snow Leopard and the just released OS X Lion.
You can download all three updated from Apple’s Developer’s Portal

Apple has just seeded iOS 5 beta 7 to developers via OTA. Oddly enough, it is not in the dev center just yet.

No word yet on the changes in the beta, but as always we will keep you updated if we discover anything.

You can let us know in the comments if you find anything.

Update: Beta 7 Is now available to download from the dev center

Apple has released iOS 5 Beta 6 recently, Now Redsn0w 0.9.8b6 is here to jailbreak the latest Beta of iOS 5.

We’ve released redsn0w 0.9.8b6 to jailbreak iOS5 beta6 (point it directly at the beta6 IPSW). Two important notes about this version:

(1) Please let your device boot normally to IOS5b6 and do a clean shutdown (slide to power off) before jailbreaking.
(2) Boot logos have intentionally been disabled for now, so you’ll see a black screen on tethered boots (you can re-enable logos or verbose boot with command-line options if you really want them back). Due increased sensitivity to abrupt filesystem shutdowns in IOS5b6, it’s very important that you do a clean shutdown before running redsn0w.

Note: This is a tethered jailbreak meaning that you will have to jailbreak your device every time the divece reboots or loses power.

Download Redsn0w 0.9.8b6 for:

Windows
Mac

Below you can find links to download RedSn0w, a tool released by the iPhone Dev-Team to jailbreak the iPhone, iPad, and iPod touch.

RedSn0w 0.9.8b6 (Mac): redsn0w_mac_0.9.8b6.zip
RedSn0w 0.9.8b6 (Windows): redsn0w_win_0.9.8b6.zip
RedSn0w 0.9.8b5 (Mac): redsn0w_mac_0.9.8b5.zip
RedSn0w 0.9.8b5 (Windows): redsn0w_win_0.9.8b5.zip
RedSn0w 0.9.8b4 (Mac): redsn0w_mac_0.9.8b4.zip
RedSn0w 0.9.8b4 (Windows): redsn0w_win_0.9.8b4.zip
RedSn0w 0.9.8b3 (Mac): redsn0w_mac_0.9.8b3.zip
RedSn0w 0.9.8b3 (Windows): redsn0w_win_0.9.8b3.zip
RedSn0w 0.9.8b2 (Mac): redsn0w_mac_0.9.8b2.zip
RedSn0w 0.9.8b2 (Windows): redsn0w_win_0.9.8b2.zip
RedSn0w 0.9.8b1 (Mac): redsn0w_mac_0.9.8b1.zip
RedSn0w 0.9.8b1 (Windows): redsn0w_win_0.9.8b1.zip

RedSn0w 0.9.6rc19 (Mac): redsn0w_mac_0.9.6rc19.zip
RedSn0w 0.9.6rc19 (Windows): redsn0w_win_0.9.6rc19.zip
RedSn0w 0.9.6rc16 (Mac): redsn0w_mac_0.9.6rc16.zip
RedSn0w 0.9.6rc16 (Windows): redsn0w_win_0.9.6rc16.zip

Hello to all users of JQT..
1.7 is done...
Please update your version to avoid error.
This is only patch to 1.7
So you need version of 1.6.2 to use this patch.

http://www.technorotic.com/wp-content/uploads/2011/05/error-3194.jpg

Interested in the new iTunes Match feature? Take a look at this video walkthrough of how it works by IGM.

If you want all the benefits of iTunes in the Cloud for music you haven't purchased from iTunes, iTunes Match is the perfect solution. It lets you store your entire collection, including music you've ripped from CDs or purchased somewhere other than iTunes. For just $24.99 a year.2

Apple has just made iTunes Match available to developers for the first time. The announcement comes via an email prompting developers to update to iTunes 10.5 Beta 6.1.

iTunes Match stores your complete music library in iCloud, allowing you to enjoy your collection anywhere, anytime, on any iPhone, iPad, iPod touch, or computer.

iTunes Match beta is currently available to developers in the United States. Beta subscribers will receive iTunes Match service during the beta period plus an additional 3 months for free with their 12 month paid subscription.

To get started with iTunes Match, download the current version of iOS 5 beta and iTunes 10.5 beta 6.1 with iTunes Match. Once installed, choose Turn On iTunes Match from the Store menu, and click "Subscribe for $24.99."

TinyUmbrella 5.00.10

I finally got around to adding 5.0 beta support for the past three betas. Sorry for the delay. Life has been... well... life. Enjoy!

Samsung D980 Charging Solution

Samsung D900i Charging Solution

Samsung D900 Charging Solution

Unlocking

Thursday, December 22, 2011

Monday, December 5, 2011

Wednesday, November 16, 2011

Friday, November 11, 2011

Saturday, October 22, 2011

1- clean i/o connector flex and pcb connector

Friday, October 21, 2011

Sunday, October 16, 2011

Saturday, October 15, 2011

Friday, October 14, 2011

Wednesday, October 12, 2011

Friday, October 7, 2011

Thursday, October 6, 2011

Wednesday, October 5, 2011

Tuesday, October 4, 2011

Monday, September 19, 2011

Saturday, September 17, 2011

Thursday, September 1, 2011

Tuesday, August 30, 2011

Saturday, August 13, 2011

Popular Posts

Total Pageviews

Links I like ...

Google Analytics